Nurse Call Systems

The Touch Series Overdoor Lights provide an instant visual aid to nursing staff for alerts and calls from patient rooms. Located outside patient rooms and along corridors, the Overdoor Light provides a clear visual status of an alert as well as improving...

The Touch Display is the heart of the Intercall Touch Series. Perfect for larger hospitals or smaller care residences, the Touch Display is the central hub of the Touch Series nurse call system. Ideally installed on a desk or wall mounted, the Touch...

Overdoor Light c/w Sounder Part No. NC806CS Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device. Indicates Standard calls via a constant...

20 Zone Master Call Controller c/w 300mA PSU Part No. NC920F / NC920S Compatible with C-TEC’s entire range of 800 Series field devices. Housed in an attractive flush mounting plastic enclosure measuring just 214mm x 178mm or...

Detects the first signs of bed wetting and raises an alarm either locally in the room or via the nurse call system so that staff can respond. The sensor mat is placed underneath the bed sheet and is connected to the control unit. When the sensor detects...

The Access Point is a simple, cost effective, wireless ID security system. Using Radio Frequency Identification technology (RFID), the Access Control Point allows hospitals and care facilities to control access to sensitive and restricted areas. The...

L617 Power Supply Unit The main controller for an older 600 system Requires 240v fused spur Requires an LBAT 2.2aH back up battery For use only on pre-2003 systems Available to special order only Technical Information Installation: Surface mount in...

Stainless Steel Emergency Assistance Alarm Kit Part No. NC951/SS A high-quality brushed stainless steel single zone emergency assistance alarm. Attractively designed, easy to install and simple to use. Allows a distressed person to...

The Medicare ceiling mounted pull cord pairs with any call point to reset the call, ideal for use in bathrooms. Technical Information Dimensions 96 x 96 x 3cm with 3m anti-ligature pull cord (wipe clean) Cord: Anti-ligature pull cord which snaps...

This lightweight pendant comes with a wrist or neck anti-ligature lanyard, giving you flexibility in tailoring your approach to care and offering independence to your residents. The pendant is IP67 rated and is both water resistant and dust-proof.

The RED208/6 alarm transmitter is carried by staff in establishments where they may feel at risk of an attack or might need to call for urgent assistance. This is our latest design of infra-red transmitter and it is powered a rechargeable battery. A...

Using the latest in low power LCD technology, the discreet alarm panel features a crystal-clear backlit call display with user controls to scroll nurse call activity clearly in order of alert level and receipt. Audio VisualDiscreet backlit display...

LED Over Door Lights provide an instant visual aid to nursing staff for alerts and calls from patient rooms. Located outside patient rooms and along corridors, the Over Door Light gives clear visual status and improved awareness of the alert.

The Door Contact is installed onto the door and activates when the door is opened. A key operator timer system gives staff the ability to pass through the door without it alarming.

Infrared Patient Wrist Pendant (push for call) Part No. QT432W Allows patients in bedrooms and communal areas to remotely trigger standard calls via a Quantec infrared call point, ceiling receiver or radio receiver Supplied on an...

Even the most severely handicapped people can have access to the nurse call system with the BC2 Breath Switch. It operates in a similar way to the pear leads and the air switches, by generating a standard call, and plugs into the jack on all...

L714 Remote sounders are designed to boost audibility of display panels throughout the home Each sounder can be zoned to only alarm for particular rooms if required. Remote sounders are commonly used where only additional sound is required as opposed to...

Charging adaptor for the RedAlert range of staff attack fobs including: - RED208/6 Attack Fob- RED209/6 Reset Fob

How does it work? The Alerta Wireless Bed Mat raises an alarm when the client leaves their bed and begins to wander. As this is a wireless system, there are no trailing wires to trip up residents or get in the way! The bed mat sends a signal wirelessly...

Quantec Network Splitter Part No. QT603 An essential wiring/installation aid for C-TEC's Quantec Addressable Call System. Helps protect against open and short circuit faults and reduces the risk of volt drop. Includes one input and...

Quantec Corridor Display (no controls) Part No. QT608CD A 16 character x 2 line display used to indicate incoming calls in corridors, staff rooms, nursing stations, etc. Shows call type, call location and (depending on the device used to...

Quantec Surveyor Data Management Software Part No. QT707S Allows detailed reports on all aspects of a Quantec system’s call activity to be sent direct to a PC’s desktop. Provides valuable information on call history,...

Quantec Programming Software Part No. QT707 PC programming tools for use with C-TEC's Quantec addressable call system. Intuitive and easy-to-use with comprehensive Help files. Requires a PC running Windows XP, Vista, 7 or 8. Kit includes...

Quantec Controller Part No. QT601-2 Supplies power to and controls a Quantec Addressable Call System. Monitors all network devices and manages the routing and distribution of all calls. Provides connections for network wiring, standby...

Quantec Addressable Infrared Call Point, Button Reset c/w Sounder (No Remote) Part No. QT609RS A programmable Quantec addressable call point c/w infrared receiver and call follower sounder. Includes a Call button, Reset button and...

Quantec Addressable Call Point, Button Reset (No Remote) Part No. QT609 A programmable Quantec addressable call point. Includes a Call button, Reset button and red/green confidence light. Can make up to 5 levels of call -...

The Safeguard transmitter provides a simple connection to assistive technology devices. It pairs wirelessly with the call system and can be individually programmed to raise the appropriate alert. The transmitter connects to a multitude of assistive...

Designed to be attached to a client’s pillow, the soft activation switch can generate a call by gently pressing the cheek or head against the foam pad. Perfect for clients who are unable to use conventional call aids such as buttons and...

The HTM6500E model has a red emergency pull switch and is HTM compliant. The model is also supplied with a pull cord and two sockets as standard. Socket 1 is for use with a wide variety of assistive technology, such as floor mats, PIR triggers and...

10-20 Zone Expansion Unit for C-TEC Call Controllers Part No. NC910ES / NC920ES / NC910EF / NC920EF Expands the number of zones on a Call Controllers by 10 or 20 zones (dependent on model purchased). Flush mount or surface mount available...

This receiver is used to increase the coverage of an infra-red receiver. They are commonly used in corridors, large dining areas and en-suite w.c’s.  Up to three slaves can be connected to an infra-red receiver, which is sufficient to cover...

These infra-red receivers are usually fitted in areas where the staff may feel at risk or may need to call for assistance. They receive alarm signals from our range of infra-red transmitters and send the location of the alarm call to the indicator panels...

Quantec Master Infrared Ceiling Receiver Part No. QT302RX Designed to accept infrared calls from compatible Quantec staff attack transmitters, patient neck/wrist pendants and staff attendance pendants. Typically used in bedrooms, corridors,...

10 Zone Master Call Controller c/w 300mA PSU Part No. NC910S / NC910F Compatible with C-TEC’s entire range of 800 Series field devices. Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm...

Four Zone Call Controller (requires NC930 12V 250mA PSU) Part No. NC944 An attractively-designed four zone call controller c/w mute and reset buttons. Fully compatible with C-TEC's entire range of 800 Series Call System components. Capable...

Eliminate all cables with our new generation of fall prevention solutions! Upgrade your falls programme with the latest technology from Fall Savers®. The NEW Fall Savers® Wireless eliminates the cord between the monitor and floor...

LED Over Door Lights provide an instant visual aid to nursing staff for alerts and calls from patient rooms. Located outside patient rooms and along corridors, the Over Door Light gives clear visual status and improved awareness of the alert. Includes a...

With the same features as the NET207M, but requiring a magnetic key for the staff functions. This call point has the same features and functions as the NET205M with the addition of an infra-red sensor. This sensor can be activated using one of our...

Medicare’s 12-inch display panels include colour backlit screen, numeric or alphanumeric display option. Optional functions include location map setting, sounder, user-editable information, call accept, zoning, function buttons and call logging...

This lightweight pendant has the option of being worn either around the neck on a lanyard or with a MED103 watch strap. It is a portable nurse call product which can be programmed to transmit either a call, assistance or emergency type of event,...