Nurse Call Systems

The Ceiling Pull Cord is ideal for hospitals, care homes and assisted living residences. The Pull Cord is paired to a central call point, providing the call address and reset function. There are several levels of call from a standard ‘toilet...

The Wristband Transmitter is a stylish portable call device that’s ideal for both care home residents and assisted living inhabitants. Its lightweight, comfortable design allows users to get on with their day-to-day lives safe in the knowledge that...

Ceiling Pull Unit Part No. QT607 Can be used to generate a Standard or Ensuite call on a Quantec Addressable Call System. Typically wired as a slave to a Quantec Addressable Call Point or Quantec Accessible Toilet Reset Point...

The L746 Addressable Overdoor Light may be located above a door or corridor to indicate the status of specific call points Red and Green LED mimic the re-assurance indicator on the call points. Can be used as a single room indicator or as a group...

Ceiling Pull Cord Unit Part No. NC807C Can be used to generate a standard call on an 800 Series Conventional Call System. Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be cancelled. Supplied...

** Replaces the HTM6500S ** The HTM6500IR model is supplied with a pull cord and two sockets as standard for connecting a pear push lead and a wide variety of assistive technologies, such as floor mats, PIR triggers and many more. Also has a...

Green reset token for use with the HTM6500iB range or call points and door monitors. Staff carry this token with them and use it to operate and answer the call system. Contains 1 x reset token.

Call point with infrared and speech functionality which not only allows residents and staff to raise a call via a portable pendant from up to ten metres from the call point eliminating the need to be in touching distance of the wall mounted unit but also...

The wireless PIR uses infrared detection technology to help carers reduce the risk of falls. This monitor can be mounted on a door or by the bedside to trigger an alert when a person breaks the infrared beam. The device works by emitting a...

The LIMK Limprog USB programming kit is used to program the Intercall nurse call systems. The Intercall power supply no longer contains pre-set addresses such as "Bedroom 1" or "Lounge". To achieve custom text in this way, it is necessary to program this...

Pack of 10 elastic wrist straps with plastic fastener. Ideal for wrist fobs and transmitters where the existing strap has become damaged or lost its elasticity. The strap has a soft and smooth finish making it ideal for elderly users and those with more...

Care management teams can configure individual cards via an easy to use programmer, assigning staff ID cards with the appropriate user name and access level. Staff response and movement in the care facility are recorded, helping prove good care is...

Neck pendant for the SAS Network II nurse call system. This infra-red transmitter is ideal for patients to use as it has a large orange button that is easy to press. Used in conjunction with the SAS range of nurse call points with an built-in infra-red...

The HTM6017 pear push lead is manufactured with an Anti-Microbial additive in both the enclosure and lead with built in suspension and safety snap, this design is both compliant and durable. Comes complete with replaceable linen clip for ease of use...

One Series call points are ideal for use in care environments as the main communication points for staff, patients or residents. The entry level addressable call point features tactile buttons and universal jack socket to lightweight pear leads to...

Our range of anti-ligature pull cord strings are designed to replace your existing fabric cord with a hygienic, wipe clean-cord designed to improve infection control and improve safety. The smooth vinyl cord features punched holes every 15cm that break...

Infrared Patient Neck Pendant (push for call) Part No. QT432 Allows patients in bedrooms and communal areas to remotely trigger standard calls via a Quantec infrared call point, ceiling receiver or radio receiver Alleviates the need for...

The Push Button Switch is a pressure-activated button designed for residents who struggle to exert force or manipulate objects in a way that prevents them from using conventional call aids. The user can simply use their finger or hand to...

Premium bed exit kit including sensor mat and controller! The risk of a patient getting out of their bed and leaving themselves susceptible to injury is a problem many caregivers have to deal with on a daily basis. We offer a premium quality bed exit...

Premium chair exit kit including sensor mat and controller! The risk of a patient getting out of their chair and leaving themselves susceptible to injury is a problem many caregivers have to deal with on a daily basis. We offer a premium quality chair...

Press Pads are pressure-activated membrane switches designed for residents who struggle to exert force or manipulate objects in a way that prevents them from using conventional call aids. Even the slightest touch, whether directly from above...

Quantec Addressable Infrared Call Point, Button Reset c/w Sounder & Remote Socket Part No. QT602RS A programmable Quantec addressable call point c/w infrared receiver, call follower sounder and remote jack socket. Includes a Call...

The Touch Wearable Neck Pendant is a stylish portable call device that’s ideal for both care home residents and assisted living inhabitants. Its lightweight, comfortable design allows users to get on with their day-to-day lives safe in the...

Allows patients / residents to make a call with ease from the bedside. Designed for the Courtney Thorne Economy+ system.

How does it work? The Alerta Wall Point Receiver can be connected to a nurse call system for centralised activation, or used on its own, independent of a nurse call system to give localised alerts through this device only. The volume can be deactivated...

The Call Point Basic is the entry-level call point and ideal for use in most care environments, from larger hospitals to residential care homes. Its sleek, wall mounted design is simple to use. It is the perfect call assistance device for staff,...

How does it work? The Wireless Alerta Detect uses infrared technology to activate the alarm when body movement is detected within the range of the infrared beam. The Wireless Alerta Detect is most effective when mounted at...

One Series call points are ideal for use in care environments as the main communication points for staff, patients or residents. The entry level addressable call point features tactile buttons and universal jack socket to lightweight pear leads to...

Mains power supply for the Wireless PIR Infrared Detector.

How does it work? The Alerta Wireless Floor sensor mat raises an alarm when the client steps on the mat, for instance when they have left their bed or chair and have begun to wander. As soon as they step onto the mat, an alarm is raised. As this is a...

The Door Contact is installed onto the door and activates when the door is opened. A key operator timer system gives staff the ability to pass through the door without it alarming.

KS1 Key Switch is typically positioned outside the client room and used to isolate items within. Commonly used with the Intercall PIR movement sensor as a way to monitor when a user has left their bed, using the key switch to arm/disarm the sensor...

The L7700 has the capacity to power an entire Intercall system with provision in the enclosure to accommodate a 12V battery for system backup requirements. The unit features integrated IEEE 802.3 Ethernet controller with embedded web server...

Button Reset Point Part No. NC809DB A button-operated reset point for use with C-TEC's 800 Series Call System. Can be used to remotely cancel standard calls generated from ceiling pulls and/or wall call points that are wired on...

How does it work? The Alerta Wireless Chair Mat raises an alarm when the client leaves their chair and begins to wander. As this is a wireless system, there are no trailing wires to trip up residents or get in the way! The chair mat sends a signal...

Eliminate all cables with our new generation of fall prevention solutions! Upgrade your falls programme with the latest technology from Fall Savers®. The NEW Fall Savers® Wireless eliminates the cord between the monitor and sensor...

Eliminate all cables with our new generation of fall prevention solutions! Upgrade your falls programme with the latest technology from Fall Savers®. The NEW Fall Savers® Wireless eliminates the cord between the monitor and sensor...

Extendable Call Lead 1.2-3.6m (4-12ft)  Part No. NC805D An extendable coiled tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc...

Description The FJB2 provides four spur outputs from the network spine with each output incorporating a over current/voltage and reverse polarity protection device. A front panel mounted red/green LED indicates the condition of the internal fuses and...

Accessible Disabled Persons Toilet Alarm Kit Part No. NC951 The UK's market-leading Disabled Persons Toilet Alarm kit. Includes everything required for a BS8300 clause compliant emergency assistance alarm. Attractively designed, easy to...