Nurse Call Systems

Quantec Monitoring Point, Button Reset Part No. QT604 A keyswitch-isolatable monitoring point c/w a RESET button for cancelling calls. Can be configured to generate a Standard or Emergency call when a fire exit or drug cupboard is...

Overdoor Light Part No. NC806C Provides visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device. Indicates Standard calls via a constant red light and Emergency calls via...

This pendant is a portable nurse call product that can be used to trigger an event on the nurse call system depending on the situation of use. The soft fabric lanyard features a strain release clip for safety. Technical...

Jack plug programmer NET236 It is used during commissioning to programme the non-infra-red addressable points i.e. RED245, RED210 and RED218 etc. with their unique address number and the text descriptions. The information is entered into the programmer...

Designed with all the features of the popular Care Cards, including staff identity, data logging and NFC technology for easy software updates and enhanced security. The Care Tokens are small, neat, and conveniently sized for discreet carrying. Care...

2 line LCD audio display to show all current alarm locations with unique audio tone for each alarm level - CALL, ASSIST, EMERGENCY & ATTACK 2 line display Adjustable volume control day/night 2 way speech between calling room and display panel to...

A stylish mobile call device paired to the nurse call system, comfortably worn around the neck with safety breakaway cord, providing discreet, reassuring confidence to the user, free to enjoy life. The neck pendant requires an infrared enabled call point...

The PIR silently detects, records and monitors resident movement for security and access control or bed monitoring. IntegrationCan be used to trigger an alert on the nurse call system when movement detected DataloggingAll system events are recorded...

KS2 Heavy Duty Key Switch is typically positioned outside the client room and used to isolate items within. Commonly used with the Intercall PIR movement sensor as a way to monitor when a user has left their bed, using the key switch to arm/disarm the...

The L762 Call/Display Unit provides all the combined features of the L752 Audio call point and L758 Audio LCD display. It features seven levels of call, hands free two way intercom, integral infra red receiver, integral LCD display, audio page facility,...

Isolatable Monitoring Point, Button Reset Part No. NC894DKB A keyswitch-isolatable monitoring point c/w magnetic door contacts for use with C-TEC's 800 Series Call System. Can be used to monitor any device with a normally open or normally...

How does it work? The Wireless Alerta Button is supplied with a wall mountable holder that can be mounted to a wall or bedside unit for holding the Wireless Nurse Call Button meaning it is always in one place if the user is bed...

Sometimes located in double bedrooms or en-suite bathrooms. This unit has a large orange call button and a socket for a push-to-call lead. As is does not have any reset or staff-to-staff alarm feature it is installed in conjunction with one of our nurse...

A wall mounted call point with a large red actuator to activate an alarm call. These units are used in areas where staff or visitors may need to activate the alarm system but may not be carrying an infra-red transmitter. It is reset using a magnetic...

The Altra Call Lite allows calls from users and staff. Typical Staff call types include Assistance, Emergency, Visit and Staff Present.

The Call Point Standard has the functionality of the Call Point Basic and much more. Like the Call Point Basic, it is ideal for use in most care environments, from larger hospitals to residential care homes. Its sleek, wall mounted design is simple to...

Booster Power Supply Unit Requires 240v fused spur Requires LBAT back up battery Provides additional network capacity (in excess of 100 power units)on systems using L617 or L717 only Cable directly from L617 or L717 using 2 core 1.5mm cable Not...

Medicare’s door units are designed to provide an easy to operate monitoring system for internal and external doors. The unit can be easily armed and disarmed using an iButton fob. When the door unit is armed, the alarm is then activated...

Slave Infra Red Receivers are used to provide infrared reception cover in additional areas in one room or ward where each individual receiver does not require a separate identity on the call system. Units must be wired back to a standard call point to...

Designed for all areas where a care call point is needed, the Connect Call Room Unit allows calls from users and staff. There are four buttons on the Connect Call Room Unit; these can be altered to suit your needs but in a standard setup...

Slave Reset provides the ability for staff to log into a room as staff member present or to reset a call from an alternative location to the bed head call point. Often located adjacent to the bedroom door to allow staff to carry out night time checks...

How does it work? This Alerta Wireless Floor sensor mat has a luxury carpet finish, helping it to blend into the room and providing the client with a soft and familiar surface to stand on. It raises an alarm when the client steps on the mat, for...

The L746S Addressable Overdoor Light with Sounder may be located above a door or corridor to indicate the status of specific call points Red and Green LED mimic the re-assurance indicator on the call points. Can be used as a single room indicator or as...

The Alerta Wireless Transmitter is used with the following wireless products: Floor+ Alertamat, Bed Alertamat and Chair Alertamat. It uses radio frequency technology to connect, with a wireless range of up to 95 metres. Once paired with the Alerta Wall...

Emergency Call Point, Button Reset c/w Remote Socket Part No. NC802DEB-1/2 An attractively designed button-operated call/reset point capable of generating Standard and Emergency calls on an 800 Series Call System. Includes a 6.35mm jack...

The Access Point is a simple, cost effective, wireless ID security system. Using the latest NFC (Near Field Communication) technology, the Access Control Point allows hospitals and care facilities to manage access to sensitive and restricted areas...

This call point has the same features and functions as the NET205M with the addition of an infra-red sensor. This sensor can be activated using one of our transmitters. This type of call point is often installed in lounge areas so particularly vulnerable...

The IP470 has been designed to provide an IP platform for older Intercall 600 / 700 systems, so existing users can benefit from the newer IP based technology. A primary function of the IP470 is to capture the date...

The L717 may be used with smaller Intercall 700 & Intercall 600 systems and the unit provides power and data signals for the network devices and stores the text programming information. Provides power and data to the complete wired network and...

Quantec Corridor Display Part No. QT608C A 16 character x 2 line display used to indicate incoming calls in corridors, staff rooms, nursing stations, etc. Includes an onboard sounder and buttons to accept, scroll...

Remote Sounder Part No. NC888D Can be connected to any multi-zone 800 Series Call Controller, Master Indicator Panel or Switchable Sounder to increase call indication levels. Indicates Standard calls via a constant tone and Emergency...

The 3 Button handset is an extension to the typical nurse call pear lead, with additional buttons which can be individually programmed to generate alternative alerts or switch third party control systems such as lighting through a relay. SimplicityThe...

The Display Panel features a large, clear, wide viewing angle display with volume control, standby battery and fitted on a swivel bracket.

The L634 is used to interface an external device(s) to the Intercall system network. Typically telephone ringing detectors (with TA1), contacts from fire alarm or other control panels or input from remote contacts Three input triggers Two non-latching...

Quantec Interface Unit c/w Remote Socket Part No. QT636 Allows any device with a normally open or normally closed 6.35mm (1/4 inch) jack plug to be connected to Quantec. Particularly suited for use with our NC805MD Portable Movement...

Quantec PIR Power Interface c/w Isolating Keyswitch Part No. QT645 Allows up to two QT638 PIR movement sensors to be connected to a Quantec addressable call system. Connects to the slave input on a QT602 or QT609 Range Call Point...

Accessible Toilet Reset Point c/w Sounder Part No. NC809DBBT A remote reset point c/w sounder specifically designed for use in Accessible Toilet Alarm systems. Allows calls generated by an NC807C ceiling pull unit to be cancelled at source,...

The Code Blue Basic nurse call point provides nursing staff with an immediate emergency call button. The location and code blue alert level will be automatically broadcast across the nurse call system for swift action. Emergency InnovationCode Blue is...

Pack of 10 magnetic reset tokens for the Quantec and 800 Series nurse call system. Comes with a handy keyring attachment. Used to reset call points and door monitor points that use a magnetic reset button.

Note: This display replaces the NET243 which is now obsolete. It is fully compatible with SAS Network II but features a new design. The Touch display is designed for challenging environments. The display/sounder unit, is low profile and vandal...