Nurse Call Systems

The Thermal Imaging Sensor monitors rooms where the resident is prone to falling or wandering at night. Positioned on the ceiling, the sensor can be adjusted to detect activity within a pre-defined area. This is generally set around the bed to detect and...

The Safeguard point is used to control the monitoring functions within a bedroom. Its sleek wall mounted design allows this unit to be either positioned either side of a bedroom door for simple staff operation. The Safeguard Point is used to alert...

Addressable Sounder Part No. QT688 An addressable sounder designed to increase call indication levels in large Quantec sites.  Can be programmed to sound when certain groups of call points are calling. Sounder rate...

The S2 Air Switch is ideal for environments such as bathrooms and showers where water could make contact with the system. It is totally sealed and waterproof and since it uses air to trigger a call, it is completely safe to use. The S2 Air...

Charging adaptor for the RedAlert range of staff attack fobs including: - RED208/6 Attack Fob- RED209/6 Reset Fob

This is a RED205 sensor mounted in a weather resistant IP65 rated enclosure. It is designed for use when personal attack coverage is required in external areas, for example gardens and patios. It has a range of approximately 10 metres and the alarm...

The RED209/6 attack/reset transmitter is carried by staff in establishments where they may feel at risk of an attack or might need to call for urgent assistance, but also features a reset button allowing manager's to reset the system. This is our latest...

The RED208/6 alarm transmitter is carried by staff in establishments where they may feel at risk of an attack or might need to call for urgent assistance. This is our latest design of infra-red transmitter and it is powered a rechargeable battery. A...

This receiver is used to increase the coverage of an infra-red receiver. They are commonly used in corridors, large dining areas and en-suite w.c’s.  Up to three slaves can be connected to an infra-red receiver, which is sufficient to cover...

These infra-red receivers are usually fitted in areas where the staff may feel at risk or may need to call for assistance. They receive alarm signals from our range of infra-red transmitters and send the location of the alarm call to the indicator panels...

Used within the building, normally on the 1st floor, to build a radio footprint to the desired parameters of the system. The RTX then enables receivers and transmitters to be installed anywhere within those parameters or radio footprint. Technical...

Medicare’s 12-inch display panels include colour backlit screen, numeric or alphanumeric display option. Optional functions include location map setting, sounder, user-editable information, call accept, zoning, function buttons and call logging...

Medicare’s 15-inch display panels include colour backlit screen and alphanumeric display option. Optional functions include location map setting, sounder, user-editable information, call accept, zoning, function buttons and call logging. Comes...

The HTM6500iBiR model is supplied with a pull cord and two sockets as standard. This model also encompasses the iButton, offering staff attendance and identification. Socket 1 is used for a wide variety of assistive technology, such as floor mats, PIR...

Replacement for 22089 which is now discontinued. This Connect Wear pendant comes with a wrist or neck anti-ligature lanyard, giving you flexibility in tailoring your approach to care and offering independence to your residents. The pendant is IP67 rated...

Hi-Output Addressable Sounder Part No. QT688/2 A programmable hi-output addressable sounder operating at up to 85dB(A). Designed to increase call indication levels in large Quantec sites. Can be configured to sound when certain...

Type a description for this product here...

Quantec Large Corridor Display Part No. QT608CD1S A large 16 character x 2 line LED display measuring 965mm x 163mm making it ideal for use in long corridors, nursing stations, staff rooms and offices. Utilises the...

Quantec Radio Receiver Part No. QT422RX Designed for use with Quantec’s QT412 & QT432 range of infrared/radio transmitters and pendants. Operates at radio frequency (RF) 868.3 MHz, Allows standard, help required, emergency and/or...

Quantec Slave Infrared Ceiling Receiver (Round Version) Part No. QT302RXRS An unobtrusive white round slave infrared receiver. Connects to a master Quantec infrared receiving device to increase IR coverage. Designed to accept infrared...

Quantec Master Infrared Ceiling Receiver (Round Version) Part No. QT302RXR An unobtrusive white round version of our Quantec Master Ceiling Receiver. Designed to accept infrared calls from compatible Quantec staff attack transmitters,...

Quantec Slave Infrared Ceiling Receiver Part No. QT302RXS Connects to a master Quantec infrared receiving device to increase IR coverage. Accepts infrared calls from compatible Quantec staff attack transmitters, patient neck/wrist pendants...

Flush Mounting Bezel for QT601-2 Quantec Controllers Part No. QT385 Allows Quantec Controllers to be semi-flush mounted. Attractive slimline design. Finished in mild steel. Front face when in situ measures 456 W x 293 H mm...

Slave Overdoor Light c/w Sounder Part No. QT606S Provides audible and visual indication of calls made from a Quantec call point outside bedrooms, WCs, etc. Flash and sounder rates change/intensify to reflect the urgency of the...

Slave Overdoor Light Part No. QT606 Provides visual indication of calls made from a Quantec call point outside bedrooms, WCs, etc. Flash and colour sequence changes/intensifies to reflect the urgency of the incoming call.  Dual...

Keyswitch Reset Point Part No. NC899IRR A secure keyswitch-operated reset point specifically designed to cancel Emergency calls generated by an NC302RXC master infrared ceiling receiver. To operate, momentarily turn the...

Magnetic Reset Point Part No. NC809DM A magnetic key-operated reset point for use with C-TEC's 800 Series Call System. Can be used to remotely and securely cancel standard calls generated from ceiling pulls and/or wall call points...

Emergency Only Call Point, Button Reset Part No. NC804DE A button-operated call/reset point capable of generating Emergency calls on an 800 Series Call System. Onboard reset button cancels Emergency calls made from the...

Emergency Infrared Call Point, Magnetic Reset c/w Remote Socket Part No. NC802DERM A button operated call point c/w infrared receiver capable of generating Standard and Emergency calls on an 800 Series Call System. Includes a magnetic reset...

Emergency Infrared Call Point, Button Reset c/w Remote Socket Part No. NC802DERB A button operated call/reset point c/w infrared receiver capable of generating Standard and Emergency calls on an 800 Series Call System. Onboard infrared...

Switchable Sounder Part No. NC887D Can be connected to any multi-zone 800 Series Call Controller or Master Indicator Panel to increase call indication levels. Indicates Standard calls via a constant tone and Emergency calls via a...

30 Zone Emergency Indicator Panel A 30 Zone Emergency Indicator Panel c/w 12V 400mA PSUs Fully compatible with C-TEC's entire range of 800 Series Call System components Capable of indicating standard (constant tone) and emergency (intermittent...

12V 250mA Double Gang PSU Part No. NC930 A compact 12V 250mA double gang power supply unit. Can provide power to up two NC944 Four Zone Call Controllers. Suitable for use in many other applications. Includes a green power on...

Stainless Steel Single Zone Call Controller c/w 12V PSU Part No. NC941/SS A high-quality brushed stainless steel single zone call controller c/w a 12V 250mA PSU. Fully compatible with C-TEC's entire range of 800 Series Call System...

Single Zone Call Controller c/w 12V 140mA PSU Part No. NC943B A single zone call controller c/w a 12V 140mA PSU and standby battery. Compatible with C-TEC's entire range of 800 Series Call System components. Capable of indicating standard...

he HTM6500C model has a Blue Cardiac Pull switch and is HTM compliant, the model is also supplied with a pull cord and two sockets as standard. This model has an automatic monitor function for situations such as bed occupancy monitoring. All...

The Controller is the heart of the nurse call system, providing power to the Extra Low Voltage devices on the secure 2 wire Intercall Bus network, and an ethernet link to the LAN for system programming and automatic call logging. SecurityPassword...

The Corridor Display is an advanced call information system which is ideal for hospitals or larger care facilities. The metre wide information panel can be wall or ceiling mounted in corridors to provide a quick, clear call indicator to busy nursing...

The Touch RFID Care Card Programmer is designed to quickly and easily program user ID numbers onto the Intercall 904 Care Card. It is a USB device that connects to a PC or laptop and is supplied with the Care Card Programmer software...

The Touch Accessory Programmer is designed to quickly and easily program user names and configuration settings into the Intercall Touch range of portable accessories including: 980 Accessory Transmitter 982 Wristband Transmitter 983 Neck...