Description
Connect Lights are normally positioned above doors in a corridor to indicate the status of the call point(s) within each room. They can also be used to monitor several call points for end of corridor indication, or as a ‘follow me’ light system.
The lights have an integral sounder that can be turned on or off.
CALL/DOOR BELL/BATHROOM – AMBER
The Connect Light will illuminate amber.
Tones – Call: Audible Alarm On: 1 second Off: 9 Seconds, Bathroom: Audible Alarm On: 1 second, Off: 3 Seconds
CARDIAC – BLUE
The Connect Light will illuminate blue.
Tones – Audible Alarm On: 0.25 Seconds (Dual Tone) Off: 0.25 Seconds
EMERGENCY/CONTROLLED DRUGS CUPBOARD/STAFF ATTACK – RED
The Connect Light will illuminate red.
Tones – Audible Alarm On: Variable Tone
PRESENCE – GREEN
When the call system is set to Presence Mode, the Connect Light will illuminate green when the presence button is pressed
Tones – None
COMPATIBILITY
- Connect only (E++)
CALL & COLOUR TYPES
- (HTM only) Fixed
- Colours & Calls as follows:
Door Bell – Amber, Presence – Green, Controlled drugs cupboard – Red, Call – Amber, Bathroom – Amber, Emergency – Red, Staff Attack – Red, Cardiac – Blue, Assistance – Amber
FUNCTIONALITY
- Single call point activation
- Multiple Call point activation – Multi bed ward, room and ensuite
ALARM TONES
- (HTM only) Fixed
FLASH OPTIONS
- (HTM only) Fixed
DIMENSIONS
- 80H x 80W x 90D (mm)
- Each ODL requires a plastic, single Patress box, surface or flush mounted, 35mm deep
POWER REQUIREMENTS
- One 12 Volt 3 Amp DC Transformer that can power a max of ten Connect Lights
- 2 Core 0.75 mm Flex
- Radial or Ring cable installation
- Each transformer will require connecting to the Radial or Ring wiring
