Quantec

Replacement locking nut for the C-TEC range of nurse call including Quantec and NC 800. Pack of 10 locking jacknuts.

1.8m (6ft) Tail Call Lead Part No. NC805C/6 A short 1.8m tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped...

4.2m (14ft) Tail Call Lead Part No. NC805C/14 A long 4.2m tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped...

Quantec Addressable Call Point, Button Reset c/w Remote Socket Part No. QT602 A programmable addressable call point c/w remote jack socket for use with C-TEC's Quantec Addressable Call System. Includes a Call button,...

Ceiling Pull Unit Part No. QT607 Can be used to generate a Standard or Ensuite call on a Quantec Addressable Call System. Typically wired as a slave to a Quantec Addressable Call Point or Quantec Accessible Toilet Reset Point...

Infrared Patient Neck Pendant (push for call) Part No. QT432 Allows patients in bedrooms and communal areas to remotely trigger standard calls via a Quantec infrared call point, ceiling receiver or radio receiver Alleviates the need for...

Quantec Addressable Infrared Call Point, Button Reset c/w Sounder & Remote Socket Part No. QT602RS A programmable Quantec addressable call point c/w infrared receiver, call follower sounder and remote jack socket. Includes a Call...

Quantec Monitoring Point, Button Reset Part No. QT604 A keyswitch-isolatable monitoring point c/w a RESET button for cancelling calls. Can be configured to generate a Standard or Emergency call when a fire exit or drug cupboard is...

Extendable Call Lead 1.2-3.6m (4-12ft)  Part No. NC805D An extendable coiled tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc...

Quantec Corridor Display Part No. QT608C A 16 character x 2 line display used to indicate incoming calls in corridors, staff rooms, nursing stations, etc. Includes an onboard sounder and buttons to accept, scroll...

Quantec Interface Unit c/w Remote Socket Part No. QT636 Allows any device with a normally open or normally closed 6.35mm (1/4 inch) jack plug to be connected to Quantec. Particularly suited for use with our NC805MD Portable Movement...

Quantec PIR Power Interface c/w Isolating Keyswitch Part No. QT645 Allows up to two QT638 PIR movement sensors to be connected to a Quantec addressable call system. Connects to the slave input on a QT602 or QT609 Range Call Point...

Pack of 10 magnetic reset tokens for the Quantec and 800 Series nurse call system. Comes with a handy keyring attachment. Used to reset call points and door monitor points that use a magnetic reset button.

Infrared Patient Wrist Pendant (push for call) Part No. QT432W Allows patients in bedrooms and communal areas to remotely trigger standard calls via a Quantec infrared call point, ceiling receiver or radio receiver Supplied on an...

Quantec Network Splitter Part No. QT603 An essential wiring/installation aid for C-TEC's Quantec Addressable Call System. Helps protect against open and short circuit faults and reduces the risk of volt drop. Includes one input and...

Quantec Corridor Display (no controls) Part No. QT608CD A 16 character x 2 line display used to indicate incoming calls in corridors, staff rooms, nursing stations, etc. Shows call type, call location and (depending on the device used to...

Quantec Surveyor Data Management Software Part No. QT707S Allows detailed reports on all aspects of a Quantec system’s call activity to be sent direct to a PC’s desktop. Provides valuable information on call history,...

Quantec Programming Software Part No. QT707 PC programming tools for use with C-TEC's Quantec addressable call system. Intuitive and easy-to-use with comprehensive Help files. Requires a PC running Windows XP, Vista, 7 or 8. Kit includes...

Quantec Controller Part No. QT601-2 Supplies power to and controls a Quantec Addressable Call System. Monitors all network devices and manages the routing and distribution of all calls. Provides connections for network wiring, standby...

Quantec Addressable Infrared Call Point, Button Reset c/w Sounder (No Remote) Part No. QT609RS A programmable Quantec addressable call point c/w infrared receiver and call follower sounder. Includes a Call button, Reset button and...

Quantec Addressable Call Point, Button Reset (No Remote) Part No. QT609 A programmable Quantec addressable call point. Includes a Call button, Reset button and red/green confidence light. Can make up to 5 levels of call -...

Quantec Master Infrared Ceiling Receiver Part No. QT302RX Designed to accept infrared calls from compatible Quantec staff attack transmitters, patient neck/wrist pendants and staff attendance pendants. Typically used in bedrooms, corridors,...

Quantec Accessible Disabled Persons Toilet Alarm Kit Part No. QT951 A cost-effective expansion kit that adds true BS8300 compliant accessible toilet alarm functionality to a Quantec Addressable Call System. Includes a QT607 ceiling pull...

Quantec Configurator Part No. QT423 Allows compatible Quantec call points, sounders, infrared transmitters and universal interface devices to be individually programmed to suit the requirements of individual sites. Can also be used to...

Addressable Sounder Part No. QT688 An addressable sounder designed to increase call indication levels in large Quantec sites.  Can be programmed to sound when certain groups of call points are calling. Sounder rate...

Hi-Output Addressable Sounder Part No. QT688/2 A programmable hi-output addressable sounder operating at up to 85dB(A). Designed to increase call indication levels in large Quantec sites. Can be configured to sound when certain...

Type a description for this product here...

Quantec Large Corridor Display Part No. QT608CD1S A large 16 character x 2 line LED display measuring 965mm x 163mm making it ideal for use in long corridors, nursing stations, staff rooms and offices. Utilises the...

Quantec Radio Receiver Part No. QT422RX Designed for use with Quantec’s QT412 & QT432 range of infrared/radio transmitters and pendants. Operates at radio frequency (RF) 868.3 MHz, Allows standard, help required, emergency and/or...

Quantec Slave Infrared Ceiling Receiver (Round Version) Part No. QT302RXRS An unobtrusive white round slave infrared receiver. Connects to a master Quantec infrared receiving device to increase IR coverage. Designed to accept infrared...

Quantec Master Infrared Ceiling Receiver (Round Version) Part No. QT302RXR An unobtrusive white round version of our Quantec Master Ceiling Receiver. Designed to accept infrared calls from compatible Quantec staff attack transmitters,...

Quantec Slave Infrared Ceiling Receiver Part No. QT302RXS Connects to a master Quantec infrared receiving device to increase IR coverage. Accepts infrared calls from compatible Quantec staff attack transmitters, patient neck/wrist pendants...

Flush Mounting Bezel for QT601-2 Quantec Controllers Part No. QT385 Allows Quantec Controllers to be semi-flush mounted. Attractive slimline design. Finished in mild steel. Front face when in situ measures 456 W x 293 H mm...

Slave Overdoor Light c/w Sounder Part No. QT606S Provides audible and visual indication of calls made from a Quantec call point outside bedrooms, WCs, etc. Flash and sounder rates change/intensify to reflect the urgency of the...

Slave Overdoor Light Part No. QT606 Provides visual indication of calls made from a Quantec call point outside bedrooms, WCs, etc. Flash and colour sequence changes/intensifies to reflect the urgency of the incoming call.  Dual...

Infrared Attendance Pendant (push for attendance) Part No. QT432A Allows nursing or security staff entering rooms during night shifts, etc., to log their attendance. Upon activation, the infrared call point or ceiling receiver that picks up...

Rechargeable IR/RF Transmitter (push for call, pull for attack) Part No. QT412RXCA Allows staff to remotely trigger Attack and Standard calls via a Quantec infrared call point, ceiling receiver or radio receiver. Can also be used on 800...

Rechargeable IR/RF Transmitter (push/pull for attack) Part No. QT412RXA Allows staff working in high-risk environments to remotely trigger an Attack call via a Quantec infrared call point, ceiling receiver or radio receiver Can also be used...