Shop

Designed with all the features of the popular Care Cards, including staff identity, data logging and NFC technology for easy software updates and enhanced security. The Care Tokens are small, neat, and conveniently sized for discreet carrying. Care...

The Guardian AIRX4 receiver is an addressable IR receiver for use on legacy systems. It is designed to receive signals from the staff activation device in the event of an attack. Technical Information Installation: Flush or surface mount in standard...

2 line LCD audio display to show all current alarm locations with unique audio tone for each alarm level - CALL, ASSIST, EMERGENCY & ATTACK 2 line display Adjustable volume control day/night 2 way speech between calling room and display panel to...

A stylish mobile call device paired to the nurse call system, comfortably worn around the neck with safety breakaway cord, providing discreet, reassuring confidence to the user, free to enjoy life. The neck pendant requires an infrared enabled call point...

For use with the Net2 system. Pack of 10 fobs. Installation To issue a token the user’s details are entered using the PC software. The token number is then entered by presenting the token to the desktop reader. Operation Once programmed into...

The Intercall L7322 is an addressable fixed point push button unit for applications where a fixed point call button is required for anyone to use. The device connects to the network like any other network device, and has its own unique address to give a...

The PIR silently detects, records and monitors resident movement for security and access control or bed monitoring. IntegrationCan be used to trigger an alert on the nurse call system when movement detected DataloggingAll system events are recorded...

KS2 Heavy Duty Key Switch is typically positioned outside the client room and used to isolate items within. Commonly used with the Intercall PIR movement sensor as a way to monitor when a user has left their bed, using the key switch to arm/disarm the...

The L762 Call/Display Unit provides all the combined features of the L752 Audio call point and L758 Audio LCD display. It features seven levels of call, hands free two way intercom, integral infra red receiver, integral LCD display, audio page facility,...

Isolatable Monitoring Point, Button Reset Part No. NC894DKB A keyswitch-isolatable monitoring point c/w magnetic door contacts for use with C-TEC's 800 Series Call System. Can be used to monitor any device with a normally open or normally...

Model YBN-R/3(WHT) is a common mounting base, which is fully compatible with Hochiki's ESP range of sensors, beacons, base sounders and VADs It is supplied with square cable clamps for secure and reliable cable termination and is also capable of driving...

How does it work? The Wireless Alerta Button is supplied with a wall mountable holder that can be mounted to a wall or bedside unit for holding the Wireless Nurse Call Button meaning it is always in one place if the user is bed...

Standard stainless steel exit button The RTE-SS series of exit switches offer a flexible solution to provide exit triggering in a variety of applications. From medium to heavy traffic use, these push buttons are suitable for internal and external use...

Entry level surface 300kg magnetic lock, monitored The C-Line range of electromagnetic locks have been designed to provide a high performance and cost-effective solution to the competitive edge of the magnetic locking market. Each model...

The XP95 Heat Detector (A2S) monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature, reporting an alarm at 55°C.  Reliable fire detection in areas with a wide temperature...

Slave Infra Red Receivers are used to provide infrared reception cover in additional areas in one room or ward where each individual receiver does not require a separate identity on the call system. Units must be wired back to a standard call point to...

Sometimes located in double bedrooms or en-suite bathrooms. This unit has a large orange call button and a socket for a push-to-call lead. As is does not have any reset or staff-to-staff alarm feature it is installed in conjunction with one of our nurse...

A wall mounted call point with a large red actuator to activate an alarm call. These units are used in areas where staff or visitors may need to activate the alarm system but may not be carrying an infra-red transmitter. It is reset using a magnetic...

The Altra Call Lite allows calls from users and staff. Typical Staff call types include Assistance, Emergency, Visit and Staff Present.

The Call Point Standard has the functionality of the Call Point Basic and much more. Like the Call Point Basic, it is ideal for use in most care environments, from larger hospitals to residential care homes. Its sleek, wall mounted design is simple to...

Booster Power Supply Unit Requires 240v fused spur Requires LBAT back up battery Provides additional network capacity (in excess of 100 power units)on systems using L617 or L717 only Cable directly from L617 or L717 using 2 core 1.5mm cable Not...

Medicare’s door units are designed to provide an easy to operate monitoring system for internal and external doors. The unit can be easily armed and disarmed using an iButton fob. When the door unit is armed, the alarm is then activated...

The Series 65 Heat Detector uses a dual thermistor network to monitor temperature.  Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty, smoky or steamy under natural conditions Flashing LED...

The Addressable Infra Red External Receivers use infrared technology to detect incidents in outside locations. The reliable design of the unit means that it is immune to interference from sunlight. This component of the personal alarm system is housed...

Designed for all areas where a care call point is needed, the Connect Call Room Unit allows calls from users and staff. There are four buttons on the Connect Call Room Unit; these can be altered to suit your needs but in a standard setup...

Slave Reset provides the ability for staff to log into a room as staff member present or to reset a call from an alternative location to the bed head call point. Often located adjacent to the bedroom door to allow staff to carry out night time checks...

The L746S Addressable Overdoor Light with Sounder may be located above a door or corridor to indicate the status of specific call points Red and Green LED mimic the re-assurance indicator on the call points. Can be used as a single room indicator or as...

How does it work? This Alerta Wireless Floor sensor mat has a luxury carpet finish, helping it to blend into the room and providing the client with a soft and familiar surface to stand on. It raises an alarm when the client steps on the mat, for...

KP readers are a keypad and a proximity reader all in one. This allows card plus PIN (or code) access control with a single reader. KP readers are for use with Switch2 and Net2 systems. Installation The reader is wired as shown on the control unit...

The 12V dc G Range, N Series power supplies has been designed for CCTV, access control and general purpose applications that require the use of a standby battery. This range has a regulated highly stable output supplying full rated current to load, plus...

The Intelligent Input/Output Module is used to monitor single pole, volt free contact inputs and control relay output contacts.  EN 54-17 & EN 54-18 Certified Meets BS 7273-4 failsafe requirements Ergonomic design for ease of wiring and...

Safebed is a state-of-the-art bed occupancy monitoring system for fall and wandering prevention   Today about 36% of people over 85 year old suffer moderate or severe dementia. In long term care units this usually means over 50% of clients. A...

Amplified alarm clock with a stylish curved form What does it do? The Wake'N'Shake CURVE is an extra loud alarm clock (95dB) which comes with a pillow shaker.  Its sleak curvy design gives it a stylish look.     Extra loud alarm...

The Alerta Wireless Transmitter is used with the following wireless products: Floor+ Alertamat, Bed Alertamat and Chair Alertamat. It uses radio frequency technology to connect, with a wireless range of up to 95 metres. Once paired with the Alerta Wall...

The Access Point is a simple, cost effective, wireless ID security system. Using the latest NFC (Near Field Communication) technology, the Access Control Point allows hospitals and care facilities to manage access to sensitive and restricted areas...

Emergency Call Point, Button Reset c/w Remote Socket Part No. NC802DEB-1/2 An attractively designed button-operated call/reset point capable of generating Standard and Emergency calls on an 800 Series Call System. Includes a 6.35mm jack...

Entry level surface 500kg magnetic lock, monitored The C-Line range of electromagnetic locks have been designed to provide a high performance and cost-effective solution to the competitive edge of the magnetic locking market. Each model...

This call point has the same features and functions as the NET205M with the addition of an infra-red sensor. This sensor can be activated using one of our transmitters. This type of call point is often installed in lounge areas so particularly vulnerable...

XP95 Sounder Base with integral isolated mounting base. Designed for indoor use. Two Apollo Tones EN54-3 Sounder Selectable Volumes 55–75dB (A), 75–91dB (A) XP95 (works on Discovery & CoreProtocol) XPert7 Addressing 4" Isolated...

The IP470 has been designed to provide an IP platform for older Intercall 600 / 700 systems, so existing users can benefit from the newer IP based technology. A primary function of the IP470 is to capture the date...