Shop

Infrared Patient Wrist Pendant (push for call) Part No. QT432W Allows patients in bedrooms and communal areas to remotely trigger standard calls via a Quantec infrared call point, ceiling receiver or radio receiver Supplied on an...

Even the most severely handicapped people can have access to the nurse call system with the BC2 Breath Switch. It operates in a similar way to the pear leads and the air switches, by generating a standard call, and plugs into the jack on all...

Personal Activation Devices are worn by all members of staff that require protection. Infrared Transmitter STC8 also has a radio transmitter and aerial built into the unit Confidence LED Push button activator - call level 1 Snatch pin - call level 2...

L714 Remote sounders are designed to boost audibility of display panels throughout the home Each sounder can be zoned to only alarm for particular rooms if required. Remote sounders are commonly used where only additional sound is required as opposed to...

Stylish Wooden Frame Commode What does it do? A traditional wooden frame commode chair with woven fibre upholstery in white and beige. The removable seat conceals a plastic commode pan and lid with carrying handle. The high chair sides provide support...

Europe's Best Selling Amplified Telephone with Volume and Tone Control What does it do? The CL100 phone is a simple to use amplified telephone. Compatible with hearing aids. Fully adjustable receiving volume and tone volume via sliders on the phone...

How does it work? The Alerta Wireless Bed Mat raises an alarm when the client leaves their bed and begins to wander. As this is a wireless system, there are no trailing wires to trip up residents or get in the way! The bed mat sends a signal wirelessly...

Quantec Network Splitter Part No. QT603 An essential wiring/installation aid for C-TEC's Quantec Addressable Call System. Helps protect against open and short circuit faults and reduces the risk of volt drop. Includes one input and...

Quantec Corridor Display (no controls) Part No. QT608CD A 16 character x 2 line display used to indicate incoming calls in corridors, staff rooms, nursing stations, etc. Shows call type, call location and (depending on the device used to...

Quantec Surveyor Data Management Software Part No. QT707S Allows detailed reports on all aspects of a Quantec system’s call activity to be sent direct to a PC’s desktop. Provides valuable information on call history,...

Quantec Programming Software Part No. QT707 PC programming tools for use with C-TEC's Quantec addressable call system. Intuitive and easy-to-use with comprehensive Help files. Requires a PC running Windows XP, Vista, 7 or 8. Kit includes...

Quantec Controller Part No. QT601-2 Supplies power to and controls a Quantec Addressable Call System. Monitors all network devices and manages the routing and distribution of all calls. Provides connections for network wiring, standby...

Quantec Addressable Infrared Call Point, Button Reset c/w Sounder (No Remote) Part No. QT609RS A programmable Quantec addressable call point c/w infrared receiver and call follower sounder. Includes a Call button, Reset button and...

Quantec Addressable Call Point, Button Reset (No Remote) Part No. QT609 A programmable Quantec addressable call point. Includes a Call button, Reset button and red/green confidence light. Can make up to 5 levels of call -...

The Safeguard transmitter provides a simple connection to assistive technology devices. It pairs wirelessly with the call system and can be individually programmed to raise the appropriate alert. The transmitter connects to a multitude of assistive...

Designed to be attached to a client’s pillow, the soft activation switch can generate a call by gently pressing the cheek or head against the foam pad. Perfect for clients who are unable to use conventional call aids such as buttons and...

Extra Loud Alarm Clock With Flashing Red Lights and Pillow Shaker What does it do? The Wake'N'Shake DYNAMITE an extra loud alarm clock (95dB) which comes with a pillow shaker.  It features a powerful shaker and a ring of red flashing LEDS...

Extra Loud Alarm Clock with Lamp What does it Ddo? The Wake'N'Shake STARis an extra loud alarm clock (95dB) which comes with a pillow shaker.  Its sleak curvy design gives it a stylish look.     Extra loud alarm to ensure you...

10 Zone Master Call Controller c/w 300mA PSU Part No. NC910S / NC910F Compatible with C-TEC’s entire range of 800 Series field devices. Housed in an attractive surface mounting plastic enclosure measuring just 214mm x 178mm...

The HTM6500E model has a red emergency pull switch and is HTM compliant. The model is also supplied with a pull cord and two sockets as standard. Socket 1 is for use with a wide variety of assistive technology, such as floor mats, PIR triggers and...

Net2 proximity ISO cards are for use with the Net2 system. Pack of 10. Installation To issue a token the user’s details are entered using the PC software. The token number is then entered by presenting the token to the desktop reader...

The Net2 plus control unit connects to the central administration PC using an RJ45 plug into a standard TCP/IP Ethernet network. This greatly increases the flexibility of installation options on sites that have LAN/WAN networks. The Net2 plus control...

Model ATJ-EN(SCI) is a Multi-Heat Sensor with SCI, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol. The ATJ-EN(SCI) incorporates a Variable Temperature heat element and a Rate of Rise heat element, both of which are...

Model ALN-EN(SCI) is a Photoelectric Smoke Sensor with SCI, which is fully compatible with Hochiki’s ESP Analogue Addressable Protocol. The ALN-EN(SCI) incorporates Hochiki’s newest High Performance Chamber Technology removing the need to use...

XP95 Sounder Visual Indicator Base with integral isolated mounting base. Designed for indoor use.  Two-Tone EN54-3 Sounder Selectable Volumes 55–75dB (A), 75–91dB (A) Visual Indicator Beacon (Red-Flash) XP95 (works on Discovery...

10-20 Zone Expansion Unit for C-TEC Call Controllers Part No. NC910ES / NC920ES / NC910EF / NC920EF Expands the number of zones on a Call Controllers by 10 or 20 zones (dependent on model purchased). Flush mount or surface mount available...

The Vibby fall sensor is the new generation of wrist-worn automatic fall detector. The enhanced reliability and the new design protects vulnerable people of any age. It is designed to be used with the TeleAlarm TA74 care phone, and will automatically...

This receiver is used to increase the coverage of an infra-red receiver. They are commonly used in corridors, large dining areas and en-suite w.c’s.  Up to three slaves can be connected to an infra-red receiver, which is sufficient to cover...

These infra-red receivers are usually fitted in areas where the staff may feel at risk or may need to call for assistance. They receive alarm signals from our range of infra-red transmitters and send the location of the alarm call to the indicator panels...

Steel Commode What does it do? The Chrome-plated wheeled commode features a standard steel frame with detachable armrests for easy side transfers and a detachable backrest for storage. Push handles and swiveling castors allow the chair to be easily...

Extra Volume and Tone What does it do? The AMPLIPOWER 40 is a large buttoned telephone for hearing impaired users.  With an adjustable receiver volume which goes up to 40 dB and is also compatible with most hearing aids.  It also features a...

Quantec Master Infrared Ceiling Receiver Part No. QT302RX Designed to accept infrared calls from compatible Quantec staff attack transmitters, patient neck/wrist pendants and staff attendance pendants. Typically used in bedrooms, corridors,...

Four Zone Call Controller (requires NC930 12V 250mA PSU) Part No. NC944 An attractively-designed four zone call controller c/w mute and reset buttons. Fully compatible with C-TEC's entire range of 800 Series Call System components. Capable...

Eliminate all cables with our new generation of fall prevention solutions! Upgrade your falls programme with the latest technology from Fall Savers®. The NEW Fall Savers® Wireless eliminates the cord between the monitor and floor...

LED Over Door Lights provide an instant visual aid to nursing staff for alerts and calls from patient rooms. Located outside patient rooms and along corridors, the Over Door Light gives clear visual status and improved awareness of the alert. Includes a...

For use with the Net2 system. Pack of 10 clamshell cards. Installation To issue a token the user’s details are entered using the PC software. The token number is then entered by presenting the token to the desktop reader. Operation Once...

The Proximity P series MIFARE® reader is suitable for use with Net2 systems. The reader is multi-format and can be used with a choice of access tokens including MIFARE®Classic protocol ISO 14443A. It can also be used with EM4100 and Paxton...

TA74 series: Carefree living with innovative carephone technology The TeleAlarm TA74 GSM carephone has been developed for people who lead an independent life in their own home, but who want the feeling of security that help is always at hand when it is...

With the same features as the NET207M, but requiring a magnetic key for the staff functions. This call point has the same features and functions as the NET205M with the addition of an infra-red sensor. This sensor can be activated using one of our...

Used within the building, normally on the 1st floor, to build a radio footprint to the desired parameters of the system. The RTX then enables receivers and transmitters to be installed anywhere within those parameters or radio footprint. Technical...