The XPERT 7 Base is a low insertion force base with stainless steel contacts allowing easy and quick installation.  XPERT addressing XPERT cards supplied with all bases Locking feature to prevent unauthorised detector removal Ideal for the...

The Series 65 Optical Smoke Detector uses light sensing technology to “see” smoke entering the chamber. The external detector moulding is identical to that of the ionisation detector, and has an indicator LED which is clear in quiescent state...

The Series 65 Heat Detector uses a dual thermistor network to monitor temperature.  Can be used for applications where smoke detectors are unsuitable Ideal for environments that are dirty, smoky or steamy under natural conditions Flashing LED...

The base is designed for use with conventional systems that have manual call points and detector bases on the same circuit. The base is fitted with a Schottky diode on the "L1 IN" and "L1 OUT" wiring terminals. This base can be used with compatible...

Slave Infra Red Receivers are used to provide infrared reception cover in additional areas in one room or ward where each individual receiver does not require a separate identity on the call system. Units must be wired back to a standard call point to...

The beating heart of the Touch nurse call system, providing the power for the Touch devices and the link to the IP network for system programming and automatic call logging. SecurityPassword protected access and back up battery. ProgrammingIntuitive...

The G822 addressable call point can generate six levels of call. There is also a call follower sounder which sounds when the call point is in ‘staff present’ mode, to inform staff of another call on the system. The extended input terminals...

The G746 Overdoor Light Unit is an optional item usually located above a door, at the end of a corridor or at a corridor junction. It will indicate the status of the IR receiver within a room or as an indicator of which direction to follow when...

The Push Button Switch is a pressure-activated button designed for residents who struggle to exert force or manipulate objects in a way that prevents them from using conventional call aids. The user can simply use their finger or hand to...

Specifically developed to generate alarms from bathrooms, toilets and en-suites. The unit is ceiling mounted and features a 3m floor length cord terminated with two easy to pull handles. It also incorporates reassurance indicators, which...

The Touch Wearable Neck Pendant is a stylish portable call device that’s ideal for both care home residents and assisted living inhabitants. Its lightweight, comfortable design allows users to get on with their day-to-day lives safe in the...

Mains power supply for the Wireless PIR Infrared Detector.

TA74 series: Carefree living with innovative carephone technology The TeleAlarm TA74 GSM carephone has been developed for people who lead an independent life in their own home, but who want the feeling of security that help is always at hand when it is...

Designed to be attached to a client’s pillow, the soft activation switch can generate a call by gently pressing the cheek or head against the foam pad. Perfect for clients who are unable to use conventional call aids such as buttons and...

Replacement locking nut for the C-TEC range of nurse call including Quantec and NC 800. Pack of 10 locking jacknuts.

Note: This display replaces the NET243 which is now obsolete. It is fully compatible with SAS Network II but features a new design. The Touch display is designed for challenging environments. The display/sounder unit, is low profile and vandal...

Sometimes located in double bedrooms or en-suite bathrooms. This unit has a large orange call button and a socket for a push-to-call lead. As is does not have any reset or staff-to-staff alarm feature it is installed in conjunction with one of our nurse...

This call point has the same features and functions as the NET205M with the addition of an infra-red sensor. This sensor can be activated using one of our transmitters. This type of call point is often installed in lounge areas so particularly vulnerable...

With the same features as the NET207M, but requiring a magnetic key for the staff functions. This call point has the same features and functions as the NET205M with the addition of an infra-red sensor. This sensor can be activated using one of our...

Jack plug programmer NET236 It is used during commissioning to programme the non-infra-red addressable points i.e. RED245, RED210 and RED218 etc. with their unique address number and the text descriptions. The information is entered into the programmer...

A wall mounted call point with a large red actuator to activate an alarm call. These units are used in areas where staff or visitors may need to activate the alarm system but may not be carrying an infra-red transmitter. It is reset using a magnetic...

The multi functional wearable allows the user to make a call, as well as alerting staff if they suffer a fall.

The Display Panel features a large, clear, wide viewing angle display with volume control, standby battery and fitted on a swivel bracket.

The Display Panel features a large, clear, wide viewing angle display with volume control, standby battery and fitted on a swivel bracket.

This lightweight pendant comes with a wrist or neck anti-ligature lanyard, giving you flexibility in tailoring your approach to care and offering independence to your residents. The pendant is IP67 rated and is both water resistant and dust-proof.

The Door Contact is installed onto the door and activates when the door is opened. A key operator timer system gives staff the ability to pass through the door without it alarming.

The Door Contact is installed onto the door and activates when the door is opened. A key operator timer system gives staff the ability to pass through the door without it alarming.

The Altra Call Lite allows calls from users and staff. Typical Staff call types include Assistance, Emergency, Visit and Staff Present.

The Altra MiniTouch is ideal for communal areas, allowing staff to view multiple calls on screen at once and enabling them to decide the most appropriate response. Can be flush mounted on the wall or fitted on a swivel bracket.

The Altra Touch gives you the ability to personalise your Nurse Call System, enabling you to safeguard your home / hospital by managing your call data for evidencing.

Allows patients / residents to make a call with ease from the bedside. Designed for the Courtney Thorne Economy+ system.

Allows patients / residents to make a call with ease from the bedside. IP67 as standard - designed to withstand complete immersion and is completely dust proof. 2.5m length.

10-20 Zone Expansion Unit for C-TEC Call Controllers Part No. NC910ES / NC920ES / NC910EF / NC920EF Expands the number of zones on a Call Controllers by 10 or 20 zones (dependent on model purchased). Flush mount or surface mount available...

Ceiling Pull Cord Unit Part No. NC807C Can be used to generate a standard call on an 800 Series Conventional Call System. Typically wired as a slave to an 800 Series Call Point or Reset Point so that its calls can be cancelled. Supplied...

Extendable Call Lead 1.2-3.6m (4-12ft)  Part No. NC805D An extendable coiled tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc...

4.2m (14ft) Tail Call Lead Part No. NC805C/14 A long 4.2m tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped...

1.8m (6ft) Tail Call Lead Part No. NC805C/6 A short 1.8m tail call lead for use with C-TEC's Quantec and 800 Series Call Systems. Allows users to remotely generate Standard calls from armchairs, beds, etc. Comprises a pear-shaped...

Infrared Patient Wrist Pendant (push for call) Part No. QT432W Allows patients in bedrooms and communal areas to remotely trigger standard calls via a Quantec infrared call point, ceiling receiver or radio receiver Supplied on an...

Infrared Attendance Pendant (push for attendance) Part No. QT432A Allows nursing or security staff entering rooms during night shifts, etc., to log their attendance. Upon activation, the infrared call point or ceiling receiver that picks up...

Infrared Patient Neck Pendant (push for call) Part No. QT432 Allows patients in bedrooms and communal areas to remotely trigger standard calls via a Quantec infrared call point, ceiling receiver or radio receiver Alleviates the need for...