Description
Emergency Call Point, Button Reset c/w Remote Socket
NC802DEB-1/2
- An attractively designed button-operated call/reset point capable of generating Standard and Emergency calls on an 800 Series Call System.
- Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
- Red reassurance LED confirms a call has been made.
- Onboard reset button cancels Standard and Emergency calls made from the NC802DEB-1/2 and Standard calls made from other devices wired on the same zone (such as ceiling pull units in Ensuite areas).
- Mounts on a standard UK 25mm single gang flush or surface back box.
| Quiescent current | 0mA (none). |
| Alarm current | Determined by the type of control equipment and number / type of field devices connected to the system. |
| Indicators | Red Reassurance LED (lit constant for Standard calls, intermittently for Emergency calls). |
| Controls | Call button (generates Standard calls); Alert button (generates Emergency calls); Reset button (cancels Standard or Emergency calls from the NC802DEB-1/2 and Standard calls from devices wired on the same Zone). |
| Connections | SIG (Signal); -Ve (Negative); +Ve (Positive). |
| Onboard 6.35mm Remote Jack Socket | Yes. For optional tail call leads, floor pressure mats, air switches etc. |
| Onboard Infrared Receiver | No. |
| Product dimensions (mm) | 87 W x 87 H x 32 D mm. Mounts on a UK 25mm single gang back box. |
| Construction & finish | Plastic. |
| IP Rating | IP20. |
| Weight | 64g. |
| Operating conditions/temperature | -5ºC to +40ºC. Max. relative humidity 95% non-condensing. |
